Our reflective vinyl stickers for bikes suitable for covering one bike. They increase visibility in low light conditions from the rear and the side by reflecting light back towards the source.
These reflective vinyl stickers for bikes are made from commercial grade, weatherproof retroreflective film which consists of catadioptric glass beads which are embedded in a transparent layer of plastic material. The smooth surface has a high scratch resistance. The minimum reflection data corresponds to standard EN 12899-1.
Each pack of stickers contains the following:
- 4 x Crank stickers (1x3cm)
- 1 x Seat post sticker (4x6cm)
- 2 x Top tube stickers (4x15cm) (these should be fitted towards the front of the frame so they are not blocked by the riders legs).
- 2 x Seat stay sitckers (2x25cm)
- 2 x Fork stickers (3x20cm)
These stickers will fit the majority of bike frames. If you have a particularly small frame, or one with unusual dimensions we can make a custom set of stickers if you email the dimensions to firstname.lastname@example.org
We would suggest thoroughly cleaning your bike to remove any dirt or grease before applying these stickers. A clean surface will give the adhesive the best chance to bond to the bike frame, and not to any dirt.
Please note that these reflective vinyl stickers for bikes are not intended as a replacement for lights. We would advise that you have a working set of lights with you whenever you cycle in the dark.